8 Start/Pause button
Press this button to start the dryer after having selected the programme and the options. The relevant light will stop flashing. If you have chosen a delayed start, the machine will begin the countdown. If the door of the appliance or the small door at the bottom is opened while the programme is running, this button must be pressed again after closing the door in order to restart the programme from the point at which it was interrupted. This button must also be depressed after a power failure and after having re-inserted the water reservoir, if it has been emptied in the middle of a programme after the �FULL TANK� light has illuminated. In both cases the light of the Start/Pause button flashes to remind you that the start button needs to be pressed again.
�End� light
This light illuminates at the end of the cooling phase, during the anti-creasing phase and at the end of the programme.
�Filter� light
This light illuminates at the end of the programme to remind you that the filters must be cleaned.
�Full Tank� light
This light illuminates at the end of the programme to remind you that the water reservoir must be emptied out. If this light illuminates during a programme this means that the water reservoir is full. The buzzer sounds, the programme stops, the light of the Start/Pause button flashes.
�Condenser� light
It comes on every 80 cycles to remind you that the condenser must be cleaned.
9 Indicator Lights
These lights indicate the following functions:
.
�Drying� light
This light indicates that the appliance is in the drying phase.
�Cooling� light
This light indicates that the appliance is in the cooling phase. At the end of drying, there is a 10 minute cooling phase to cool the laundry.
